Forums Forums Help/Rules Help Edit Profile My Profile Member List Register  
Search Last 1 | 3 | 7 Days Search Search  
Ottertooth Forums * Off-topic * Archive through August 15, 2007 * Thunderbox palns * Archive through February 28, 2005 < Previous Next >

Author Message
 Link to this message

james_iii
Member

Post Number: 1
Registered: 02-2005
Posted on Thursday, February 24, 2005 - 4:21 pm:   Edit Post Delete Post

I'm looking for a simple plan for a thunderbox for my acreage. I've used the thunderboxes in Algonquin, The Massasauga, and other backcountry parks
Any help would be appreciated
 Link to this message

ed
Moderator

Post Number: 153
Registered: 03-2004


Posted on Friday, February 25, 2005 - 10:46 am:   Edit Post Delete Post

You could try a plastic barrel, cut it in half, put a seat on the bottom part and then cut a suitable hole for it. The barrels can usually be obtained from a recycler for about $10 and you can either find a used seat or buy a cheap one for about $12. You can also use the top half of the barrel, but you have to work around the bungs to place the seat.

We put about 4 of them out on sites around Obabika last season, so it will be interesting to see how well they weathered the winter. The barrels are made of polyethylene so they should be OK, but the seats may not survive all that long.

If you poke around this site a bit you might find a picture of one that Kim made last year.
 Link to this message

barbara
Member

Post Number: 12
Registered: 06-2004
Posted on Saturday, February 26, 2005 - 9:57 am:   Edit Post Delete Post

Ed, what are the plans for emptying those barrels?

I seem to remember reading that they are used in a PP in Quebec, too. Can't remember which one, though.

I'll do some searching on CCR for alscool's post about his wooden thunderboxes, unless he pops up and re-posts it here. (hint, hint) :-)

Barbara

 Link to this message

ed
Moderator

Post Number: 154
Registered: 03-2004


Posted on Saturday, February 26, 2005 - 10:23 am:   Edit Post Delete Post

Barbara;
We cut the drums in half, dug an opening in the ground and put the open end over the hole. No emptying required, just fill in the hole when it gets full as is done with a regular Thunderbox and move it to a new location.

P.S. Brian: in the above note, I tried to use the letter "a" beside the word "hole" Guess what! It would not let me post. Had I used the letter "a" followed by two "s's" and then used the word hole,attached to that then I would not be surprised if it hadn't posted.
( I wonder if it will object to this as well?)
 Link to this message

ed
Moderator

Post Number: 155
Registered: 03-2004


Posted on Saturday, February 26, 2005 - 10:25 am:   Edit Post Delete Post

Apparently not. It is very sensitive
 Link to this message

kim
Member

Post Number: 79
Registered: 03-2004


Posted on Saturday, February 26, 2005 - 10:37 am:   Edit Post Delete Post

The barrels we used had contained bubble gum extract.
Bet they dont smell like bubble gum now!

I will try to find a picture and post later.
 Link to this message

brian
Moderator

Post Number: 347
Registered: 02-2004


Posted on Saturday, February 26, 2005 - 10:44 am:   Edit Post Delete Post

Ed, it rules with digital mouthwash.
 Link to this message

ed
Moderator

Post Number: 156
Registered: 03-2004


Posted on Saturday, February 26, 2005 - 2:41 pm:   Edit Post Delete Post

That is a good explanation Brian. I like that.

Now, the other drum we cut in half had been used to carry Kikomen Soya sauce.

But... if you want a real solid Thunderbox you need to see if Alscool would be willing to share his plans for a cedar one. He and his bud, Chris made several of these and they are very well built with nice lids and sliver free tops to sit upon.
 Link to this message

brian
Moderator

Post Number: 348
Registered: 02-2004


Posted on Saturday, February 26, 2005 - 4:38 pm:   Edit Post Delete Post

Sliver-free to protect your tooshy!
 Link to this message

brian
Moderator

Post Number: 349
Registered: 02-2004


Posted on Sunday, February 27, 2005 - 12:20 pm:   Edit Post Delete Post

MacCowPie Crapper Companies prototype deluxe model

It was placed on Ranger Point on Obabika Lake July 30/04.

 Link to this message

brian
Moderator

Post Number: 350
Registered: 02-2004


Posted on Sunday, February 27, 2005 - 2:16 pm:   Edit Post Delete Post

The other half of the above deluxe model. Does not require assembly.

 Link to this message

ed
Moderator

Post Number: 157
Registered: 03-2004


Posted on Monday, February 28, 2005 - 9:14 am:   Edit Post Delete Post

OK Brian;
Thank you for digging these out.
Maybe now we should all move on to more........ intellectual matters.
 Link to this message

brian
Moderator

Post Number: 351
Registered: 02-2004


Posted on Monday, February 28, 2005 - 9:46 am:   Edit Post Delete Post

What do you mean? I am working at the peak of my intellectual capacity!
 Link to this message

kim
Member

Post Number: 80
Registered: 03-2004


Posted on Monday, February 28, 2005 - 8:05 pm:   Edit Post Delete Post

The deluxe model has many useble /user friendly features we are sure that you will enjoy.

Roof and walls (field serviceable)
Solar light and reflectors.
Arm rests.
CSA approved seat and lid .

The optional waterproof bucket contains:
Journal and pencils
magazines
waterproof matches
emergency blanket
assorted nuts ,bolts and screws.
TP and hand sanitizer.

If you stop in during the summer ,please write your comments in the journal.We want to know how we can improve your experience.

We aim to please.
 Link to this message

brian
Moderator

Post Number: 352
Registered: 02-2004


Posted on Monday, February 28, 2005 - 9:44 pm:   Edit Post Delete Post

What magazines? Any Marvel comics?
Foot rest?

Forums | Last Day | Last Week | Search | User List | Help/Rules Home